MB Gigabyte Z790 GAMING X LGA1700 DDR5 7600MHz OC 4XM.2 Type-C 2.5Gb PCIe4.0 HDMI/DP

Specifications
– CPU: LGA1700 socket: Support for the 13th and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors
– L3 cache varies with CPU
– Chipset: Intel® Z790 Express Chipset
Memory
– Support for DDR5 7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.) /6800(O.C.) /6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory modules
– 4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
– Dual channel memory architecture
– Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
– Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
– Support for Extreme Memory Profile (XMP) memory modules
Onboard Graphics
Integrated Graphics Processor-Intel® HD Graphics support
– 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz *Support for HDMI 2.0 version and HDCP 2.3.
– 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60 *Support for DisplayPort 1.2 version and HDCP 2.3
Audio
– Realtek® Audio CODEC
– High Definition Audio
– 2/4/5.1/7.1-channel
– Support for S/PDIF Out
– LAN: Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
Expansion Slots
– CPU: 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16) *For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
– Chipset: 1 x PCI Express x16 slots, supporting PCIe 4.0 and running at x4 (PCIEX4_1)
– 1 x PCI Express x16 slots, supporting PCIe 3.0 and running at x4 (PCIEX4_2)
Storage Interface
– CPU: 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)
– Chipset: 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2Q_SB)
– 1 x M.2 connector (Socket 3, M key, type 22110/2280 SATA and PCIe 4.0 x4/x2 SSD support) (M2M_SB)
– 6 x SATA 6Gb/s connectors
– RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices
– RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices
USB
– Chipset: 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2×2 support
– 1 x USB Type-C® port with USB 3.2 Gen 2 support, available through the internal USB header
– 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
– 5 x USB 3.2 Gen 1 ports (3 ports on the back panel, 2 ports available through the internal USB header)
– Chipset+2 USB 2.0 Hubs: 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
Internal I/O Connectors
– 1 x CPU fan header
– 1 x water cooling CPU fan header
– 3 x system fan headers
– 1 x system fan/water cooling pump header
– 2 x addressable LED strip headers
– 2 x RGB LED strip headers
– 4 x M.2 Socket 3 connectors
– 6 x SATA 6Gb/s connectors
– 1 x USB Type-C® header, with USB 3.2 Gen 2 support
– 1 x USB 3.2 Gen 1 header
– 2 x USB 2.0/1.1 headers
– 2 x Thunderbolt™ add-in card connectors
– 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
– 1 x Q-Flash Plus button
Back Panel Connectors
– 4 x USB 2.0/1.1 ports
– 2 x USB 3.2 Gen 2 Type-A ports (red)
– 1 x DisplayPort
– 1 x HDMI 2.0 port
– 3 x USB 3.2 Gen 1 ports
– 1 x USB Type-C® port, with USB 3.2 Gen 2×2 support
– 1 x RJ-45 port
– 1 x optical S/PDIF Out connector
– 2 x audio jacks
– Operating system: Windows 11 64-bit, Windows 10 64-bit
– Form Factor: ATX Form Factor; 30.5cm x 24.4cm