MB Gigabyte B760 GAMING X DDR5 LGA1700 7600MHz OC SATA3 3xM.2 USB3.2/Type-C PCIe 4.0 DP/HDMI

Specifications
CPU
– LGA1700 socket: Support for the 13th and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors
– L3 cache varies with CPU
– Chipset: Intel® B760 Express Chipset
Memory
– Support for DDR5 7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.) /6800(O.C.) /6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 MT/s memory modules
– 4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
– Dual channel memory architecture
Onboard Graphics
– Integrated Graphics Processor-Intel® HD Graphics support:
– 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60 Hz *Support for DisplayPort 1.2 version and HDCP 2.3
– 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz *Support for HDMI 2.0 version and HDCP 2.3. (Graphics specifications may vary depending on CPU support.)
Audio
– Realtek® Audio CODEC
– High Definition Audio
– 2/4/5.1/7.1-channel
– Support for S/PDIF Out
– LAN: Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
Expansion Slots
– CPU: 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x16 (PCIEX16) * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
– Chipset: 2 x PCI Express x16 slots, supporting PCIe 3.0 and running at x1 (PCIEX1_1, PCIEX1_2)
Storage Interface
– CPU: 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)
– Chipset: 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2M_SB)
– 4 x SATA 6Gb/s connectors
– RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices
USB
– Chipset: 1 x USB Type-C® port with USB 3.2 Gen 2 support, available through the internal USB header
– 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel
– 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 1 support
– 3 x USB 3.2 Gen 1 ports (1 port on the back panel, 2 ports available through the internal USB header)
– 1 x USB 2.0/1.1 port on the back panel
– Chipset+2 USB 2.0 Hubs: 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
Internal I/O Connectors
– 1 x CPU fan/water cooling pump header
– 3 x system fan headers
– 1 x system fan/water cooling pump header
– 2 x addressable LED strip headers
– 2 x RGB LED strip headers
– 3 x M.2 Socket 3 connectors
– 4 x SATA 6Gb/s connectors
– 1 x USB Type-C® header, with USB 3.2 Gen 2 support
– 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
– 1 x serial port header
– 1 x Q-Flash Plus button
Back Panel Connectors
– 1 x USB 3.2 Gen 2 Type-A port (red)
– 1 x USB Type-C® port, with USB 3.2 Gen 1 support
– 1 x USB 3.2 Gen 1 port
– 5 x USB 2.0/1.1 ports
– 1 x DisplayPort
– 1 x HDMI port
– 1 x RJ-45 port
– 6 x audio jacks
– I/O Controller: iTE® I/O Controller Chip
– Operating system :Windows 11 64-bit, Windows 10 64-bit
– Form Factor: ATX Form Factor; 30.5cm x 24.4cm