DIMM 64GB DDR4 3200MHz Kingston Fury Beast Kit CL16 (2×32)

DESCRIPTION
– Kingston FURY KF432C16BBK2/64 is a kit of two 4G x 64-bit (32GB) DDR4-3200 CL16 SDRAM (Synchronous DRAM) 2Rx8,memory module, based on sixteen 2G x 8-bit FBGA components per module.
Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Total kit capacity is 64GB. Each module has been tested to run at DDR4-3200 at a low latency timing of 16-20-20 at 1.35V.
– The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
FACTORY TIMING PARAMETERS
– Default (JEDEC): DDR4-2400 CL17-17-17 @ 1.2V
– XMP Profile #1: DDR4-3200 CL16-20-20 @ 1.35V
– XMP Profile #2: DDR4-3000 CL16-19-19 @ 1.35V
SPECIFICATIONS
– CL(IDD) – 17 cycles
– Row Cycle Time (tRCmin) – 45.75ns(min.)
– Refresh to Active/Refresh – 350ns(min.)
– Command Time (tRFCmin)
– Row Active Time (tRASmin) – 32ns(min.)
– UL Rating – 94 V – 0
– Operating Temperature – 0oC to +85oC
– Storage Temperature – -55oC to +100oC
FEATURES
– Power Supply: VDD = 1.2V Typical
– VDDQ = 1.2V Typical
– VPP = 2.5V Typical
– VDDSPD = 2.2V to 3.6V
– On-Die termination (ODT)
– 16 internal banks; 4 groups of 4 banks each
– Bi-Directional Differential Data Strobe
– 8 bit pre-fetch
– Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
– Height 1.34” (34mm), w/heatsink