SODIMM Notebook Memory Kingston 16GB CL22 DDR4 3200MHz 1.2V

DESCRIPTION
– This document describes ValueRAM’s KVR32S22S8/16 is a 2G x 64-bit (16GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 2G x 8-bit FBGA
components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
FEATURES
– Power Supply: VDD = 1.2V Typical
– VDDQ = 1.2V Typical
– VPP = 2.5V Typical
– VDDSPD = 2.2V to 3.6V
– Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
– Low-power auto self refresh (LPASR)
– Data bus inversion (DBI) for data bus
– On-die VREFDQ generation and calibration
– Single-rank
– On-board I2 serial presence-detect (SPD) EEPROM
– 16 internal banks; 4 groups of 4 banks each
– Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
– Selectable BC4 or BL8 on-the-fly (OTF)
– Fly-by topology
– Terminated control command and address bus
– PCB: Height 1.18” (30.00mm)
– RoHS Compliant and Halogen-Free
SPECIFICATIONS
– CL (IDD): 22 cycles
– Row Cycle Time (tRCmin): 45.75ns(min.)
– Refresh to Active/Refresh: 350ns(min.)
– Command Time (tRFCmin)
– Row Active Time (tRASmin): 32ns(min.)
– UL Rating: 94 V – 0
– Operating Temperature: 0o C to +85o C
– Storage Temperature: -55o C to +100o C