DIMM 32GB DDR4 3200MHz Kingston HyperX Fury Black CL16

Kingston

Description
– HyperX HX432C16FB3/32 is a 4G x 64-bit (32GB) DDR4-3200 CL16 SDRAM (Synchronous DRAM) 2Rx8, memory module, based
on sixteen 2G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-3200 at a low latency timing of 16-20-20 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
Factory timing parameters
– Default (JEDEC): DDR4-2400 CL17-17-17 @1.2V
– XMP Profile #1: DDR4-3200 CL16-20-20 @1.35V
– XMP Profile #2: DDR4-3000 CL16-19-19 @1.35V
Specifications
– CL (IDD): 17 Cycles
– Row Cycle Time (tRCmin): 45.75ns (min)
– Refresh to Active/Refresh: 350ns (min)
– Command Time (tRFCmin)
– Row Active Time (tRASmin): 32ns (min)
– UL Rating: 94 V – 0
– Operating Temperature: 0oC to +85oC
– Storage Temperature: -55oC to +100oC
Features
– Power Supply: VDD = 1.2V Typical
– VDDQ = 1.2V Typical
– VPP = 2.5V Typical
– VDDSPD = 2.2V to 3.6V
– On-Die termination (ODT)
– 16 internal banks; 4 groups of 4 banks each
– Bi-Directional Differential Data Strobe
– 8 bit pre-fetch
– Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
– Height 1.3425” (34.1mm), w/heatsink

9.290 ДЕН

SKU: DIMM 32GB DDR4 3200MHz Kingston HyperX Fury Black CL16 Категории: ,

Оцена

Нема оцени

Биди прв што ќе го оцени “DIMM 32GB DDR4 3200MHz Kingston HyperX Fury Black CL16”

Вашата адреса за е-пошта нема да биде објавена. Задолжителните полиња се означени со *