DIMM 32GB DDR4 3600MHz Kingston HyperX Fury Black CL18 RGB

Kingston

Description
– HyperX HX436C18FB3A/32 is a 4G x 64-bit (32GB) DDR4-3600 CL18 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 2G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-3600 at a low latency timing of 18-22-22 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
Factory timing parameters
– Default (JEDEC): DDR4-2400 CL17-17-17 @1.2V
– XMP Profile #1: DDR4-3600 CL18-22-22 @1.35V
– XMP Profile #2: DDR4-3000 CL16-18-18 @1.35V
Specifications
– CL (IDD): 17 cycles
– Row Cycle Time (tRCmin): 45.75ns(min.)
– Refresh to Active/Refresh: 350ns(min.)
– Command Time (tRFCmin)
– Row Active Time (tRASmin): 32ns(min.)
– UL Rating: 94V – 0
– Operating Temperature: 0o C to +70o C
– Storage Temperature: -40o C to +85o C
Features
– Power Supply: VDD = 1.2V Typical
– VDDQ = 1.2V Typical
– VPP = 2.5V Typical
– VDDSPD = 2.2V to 3.6V
– On-Die termination (ODT)
– 16 internal banks; 4 groups of 4 banks each
– Bi-Directional Differential Data Strobe
– 8 bit pre-fetch
– Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
– Height 1.624” (41.24mm), w/heatsink

9.990 ДЕН

SKU: DIMM 32GB DDR4 3600MHz Kingston HyperX Fury Black CL18 RGB Категории ,